Thread Locking Adhesive Agent - Hitachi 4HK1 Workshop Manual

14A-8 Service Information Guide (All)
1. Using the thread locking adhesive agent
Type
Loctite 242
Loctite 262
Loctite 271
Caution：
・ Thoroughly remove grime, moisture, oil, and
grease from the bolts, bolt holes, and screw
thread portion of the nuts to which thread
locking adhesive agent will be applied.
Note：
・ Verify that the cleaned sections are dry.
Caution：
・ After tightening, do not apply excessive torque
or vibration for at least 1 hour until the thread
locking adhesive agent hardens.
Apply the thread locking adhesive agent to the end 1/3 of
the bolt and tighten to the specified torque.

Thread locking adhesive agent

Color
Blue
Red
Red