Term - Hitachi 6HK1 Workshop Manual

Service Information Guide (All models) 14A-9

Term

1. Term
Nominal dimensions
Refers to standard values for production.
Specified value
Refers to specified values for inspection, adjustment,
assembly, and installation.
Limit
Refers to a maximum or minimum value that should not
be exceeded during maintenance. If this value is
exceeded, replacement or repair must be made.
Warning Refers to something which may cause serious
injuries if it is not performed properly.
CAUTION
Refers to something which may cause physical loss or
damage if it is not performed properly.
NOTE
Instruction, guidance, and usage conditions regarding
usage, operation, and repair in the additional information.