2. Tips for stable memory card performance: Your Nextbase™ Dash Cam is set to record video, in files of just 1 minute in length. This means that each video file is a manageable size should you need to download and send to your insurance company.
Do not place the Dash Cam in front of or above any airbag. Battery Warnings Lithium-ion batteries are used in most Nextbase™ Dash Cams. If these guidelines are not followed, batteries may experience a shortened life span or may present a risk of damage to the Dash Cam, fire, chemical burn, electrolyte leak, and/or injury.
Nextbase™ does not assume any responsibility for any fines, penalties, or damages that may be incurred as a result of any state or local law or ordinance relating to the use of your Nextbase™ Dash Cam. This device complies with Innovation, Science and Economic Development Canada license-exempt Camera Legal Requirements Precaution RSS standard(s).
Windows is a registered trademark of Microsoft Corporation in the United States and other countries. Rear Window Camera MicroSD™ and the microSD logo are trademarks of SD-3C, LLC. Nextbase™, MyNextbase Player™, MyNextbase Cloud and Click&Go PRO™ are registered trademarks of Portable Multimedia Ltd. Other trademarks and trade names are those of their respective owners.
The Nextbase™ 320XR is designed for use with a Rear Window Camera, allowing you to record both the road ahead, and the road behind, making sure you’re protected against tailgaters and rear-end impacts.
Camera Parts and Controls See below to identify the parts and controls of your Dash Cam LEDs Dust Cover Right: Blue Mounting point located under the dust cover. - The Blue LED will be on while the Dash Cam is charging. It will turn off when charging is complete, even if the Dash Cam is still plugged in.
Page 10
Camera Parts and Controls (cont.) See below to identify the parts and controls of your Dash Cam USB Cover MicroSD Card Slot USB-PC port located under the dust cover. Insert the MicroSD card here, taking care that the gold contacts are facing towards the screen side of the Dash Cam.
Take care that card has 'clicked' into place, a second push inwards will release the memory card. - For best results, we recommend using Nextbase™ branded SD cards. - Do not remove or insert the memory card when the Dash Cam is turned on.
Page 12
Also available to purchase is a Nextbase Hardwire Kit. This connects your Dash Cam directly to the vehicle’s fusebox to power it leaving your 12Vdc outlet available for Phone / Sat Nav charging.
Page 13
Dash Cam Installation (cont.) 6 Remove the adhesive cover layer Peel back the red cover layer to expose the adhesive surface, ready to mount on your windscreen. 7 Straighten the Dash Cam Ensure that the Dash Cam is horizontal and faces straight out of the windscreen. Ensure that objects on the Dash Cam display appear level, and adjust as required.
Page 14
Nextbase™ Dash Cam. As per the installation instructions, you must install the Dash Cam so it does NOT obstruct the driver’s view of the road (red, above), preferably on the passenger side of the vehicle and behind the rear view mirror.
Rear Window Camera Installation 1 Attach the mount to the Rear Window Camera Place the magnetic, adjustable mounting fixture on top of the camera. The changeable angle allows for the Rear Window Camera to be mounted on both slanted car windows, and vertical van windows.
Page 16
3 Route the Rear Facing Camera cable Route the Rear Facing Camea cable through your vehicle to the rear window, stowing the cable within the headlining, using the Nextbase™ Cable Tidy Tool (included with your Dash Cam) if necessary. The Connector Cable...
Page 17
Rear Window Camera Installation (cont.) 4 Camera Placement It is advisable to place the rear racing camera within the wiper zone towards the top of your rear window in order to record the clearest possible image. Ensure that the view is not obstructed by heating grid lines.
Camera Angle Adjustment 7 Adjusting the Dash Cam With the mount attached to the windscreen, ensure that objects on the Dash Cam display (both front and rear views) are level and adjust as required. Ensure that the road is at the centre of the image, in the central third of the display.
Mount Attachment Removing Adhesive Residue To attach the mount, align the pins on the mount with the holes on the adhesive attachment and slide firmly to the right until you hear the pieces click into place. To remove the top, simply do the reverse, If you wish to remove the adhesive mount from your windscreen, use hot soapy water or an alcohol slide it to the left until you can lift it off of the mounting pins.
First Time Use To ensure the set up of this Dash Cam is as quick and Language simple as possible, there is an easy to follow English ‘First Time Use’ menu. Dansk This menu is used to set Language, Time, and Date. Deutsch Espanol This menu will appear when:...
Page 21
Menus Video Menu Options Resolution Press the ‘Menu’ button to enter the Dash Cam’s ‘Video Menu’ system. Change your Dash Cam’s recording resolution Options: 1080P @ 30FPS, 720P @ 30FPS, 720P @ 60FPS Default: 1080P Video Menu With the Rear Window Camera attached, you will be able Resolution to choose between 1080P or 720P recording for the Dash Exposure...
Video Menu Options (cont.) Menus (cont.) Press the ‘Menu’ button again when in ‘Video Menu’ to enter the Dash Cam’s ‘Setup Menu’ system. Time & Date Stamp Turn On/Off the time and date stamp shown at the bottom of the screen on recorded files. Options: On and Off Default: On Setup Menu...
Page 23
Setup Menu Options (cont.) Reversing Camera When ‘Reversing Camera’ is turned ON, the full screen Rear View will be flipped horizontally to mimic using Device Sounds a rear view mirror. Turn On/Off the beep that sounds when a button is Do not solely rely on ‘Reversing Camera’...
Playback Mode Audio Recording ON Can be switched OFF in the Dash Cam Setup Menu. Nextbase Logo Stamp The key below explains the various information displayed Parking Mode ON on the screen when your Dash Cam is in Playback mode.
Playback Mode Menus If the Menu button is pressed while scrolling through your videos, you will open the Playback Menu, How to Protect/Unprotect Files Using the Up and Down arrows, select ‘Protect Files’ giving you the option to protect, unprotect, or delete files. You can use the Menu button as a back button On the next page, you will be asked if you want to Protect or Unprotect while in the menu system.
Opens the Help menu for MyNextbase Connect™. Options available include: how to use, check Add Video Remove Save for updates, Nextbase™ website, help & support, send diagnostics, register your Dash Cam, 190430_111804_009.MP4 contact us, and about. Playback Window Displays Dash Cam videos playing in MyNextbase Connect™.
Bring to Front your video will pause at the specified frame and Bring Forwards Videos can also be upload to the Nextbase server; you will be e-mailed a secure link to view or ™ Bring Backwards display any annotations that you have added.
MyNextbase Cloud™ is our free online video sharing service where you can safely and securely store your Dash Cam files. Upload your file to the Nextbase™ Server using the ‘Share Video’ function on either MyNextbase Player™, or the MyNextbase Connect™ app. Please note Upload To that upload times are dependent on video file size.
Dash Cam, including what firmware version is currently active (i.e R05.3). appear, e.g. NEXTBASE (D:) and you will be able to view / manage the stored files upon the MicroSD card within the Dash Cam. You will be able to view your files using your system’s default media player.
Q) “What errors may I encounter using a faulty or incompatible SD card?” A) You may experience any of the following: Nextbase have designed an SD card specifically to fulfil the needs of our Dash Cams. We work directly with the · SD error messages factory to ensure consistency of the SD card quality.
Video Image is blurred. FIlter has been set properly; see the Accessories Manual (available from www.nextbase.com) for instructions on how to set up the Lens. MicroSD cards are very small and require delicate use. Align the card with the diagram shown upon the Dash Cam and insert the card until you feel a slight spring resistance.
It is normal for the camera to feel warm during typical use, especially when it’s recording high definition video or communicating via Wi-Fi. Reset the Dash Cam to the default settings within the Setup Menu and try again. Should the problem persist call the UK helpline (02920) 866429 or call your local support centre, found at www.nextbase.com Unresolved Issues Alternatively email: support@nextbase.com...
Europe. It is used on many products across many industries (for example, SD cards) as a mark of Nextbase™ grants to you for the period for which you possess the relevant device a non-exclusive, compliance with European standards.
If the unit sent in is still under its original warranty, then the new warranty is 30 days or to the end of state to state (or by country or province). Nextbase™ does not exclude, limit or suspend other legal rights the original 1 year warranty, whichever is longer.
This product does not contain any user-serviceable parts. Repairs should only be other antenna or transmitter. made by an authorised Nextbase™ service centre. Unauthorized repairs or modifications - A minimum separation distance of 20cm must be maintained between the antenna and the could result in permanent damage to the equipment, and void your warranty and person for this appliance to satisfy the RF exposure requirements.
Everything you might need for video storage, Dash Cam protection, and more. (Internet connection PC/Mac software. required). Dash Cam Services Compatibility MyNextbase Cloud™ MyNextbase Connect™ MyNextbase Player™ For more details on our full range of Dash Cams and Accessories, download the Nextbase™ Accessories Manual, available from www.nextbase.com...
Need help?
Do you have a question about the 320XR and is the answer not in the manual?
Questions and answers
320 XR rear camera does not work with any selection