Polaris RZR XP 1000 Owner's Manual page 147

WHEEL REMOVAL
1. Position the vehicle on a level surface.
2. Place the transmission in PARK.
3. Stop the engine.
4. Loosen the wheel nuts slightly.
5. Elevate the side of the vehicle by placing a suitable stand under the frame.
6. Remove the wheel lug nuts. Remove the wheel.
WHEEL INSTALLATION
Improperly installed wheels can adversely affect tire wear and vehicle
handling, which can result in serious injury or death. Always ensure that all
nuts are torqued to specification. Do not service axle nuts that have a cotter pin
installed. Your POLARIS dealer or other qualified person can assist.
1. Place the transmission in PARK.
2. Place the wheel in the correct position on the wheel hub. Be sure the valve
stem is toward the outside and rotation arrows on the tire point toward
forward rotation.
3. Attach the wheel nuts and finger tighten.
4. Carefully lower the vehicle to the ground.
5. Torque the wheel nuts to specification. See the Axle and Wheel Nut Torque
Specifications section for details.
WARNING
MAINTENANCE
145