Procedure To Save Voice Data (Cf Memory) - NEC UNIVERGE SV9300 Migration Manual

Procedure to Save Voice Data (CF Memory)

Set the CPU to off-line mode.
[Procedure to set off-line mode]
(1) Set the SENSE switch on the CPU blade to "E" or "F".
(2) Push the RESET switch on the CPU blade.
After performing the System data memory all clear for the SV8300 (CM00>1:CCC) using
the SV8300 PCPro, back up the system data (CMEC Y=6>0: 0).
Load the migration program for voice data (SC-4243) to the SV8300 using the Program
Upgrade (Off-line) of SV8300 PCPro (See the SV8300 PC Programming Manual).
Set the CPU to off-line mode.
[Procedure to set off-line mode]
(1) Set the SENSE switch on the CPU blade to "E" or "F".
(2) Push the RESET switch on the CPU blade.
After performing the System data memory all clear for the SV8300 (CM00>1:CCC) using
the SV9300 PCPro, back up the system data (CMEC Y=6>0: 0).
Make the CF memory available. (After assigning data with CM08>896: 0 and CM08>909:
0, back up the system data.)
Start up the CPU in on-line mode.
[Procedure to set on-line mode]
(1) Set the SENSE switch on the CPU blade to "1".
NOTE: Be sure to set the system to on-line mode before copying the voice data.
Copy the voice data from the CF memory to the CPU memory (CMEC Y=D>9: 0).
NOTE: When the power is turned off or the system is reset after completing the copy, the
data in the CPU memory is deleted.
Confirm that the voice data copy has been completed. (CMEC Y=D>9: 3)
CHAPTER 2 MIGRATION PROCEDURE
Start
A
- 16 -