Panasonic KX-TD500 User Manual page 91

Prime Line Preference — Incoming (Assignment)
You are connected to a call on the line assigned as the prime line automatically, when you go
off-hook to answer a call.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
PT
2
Dial 2.
The display shows the current status.
<PT Display Example>
Pref.In :ICM
— To exit the Station Programming mode: Press [PROGRAM].
Note
• If your PT is DN type, then you cannot select "ICM."
User Manual
3
Press the desired line access
Dial 3.
button.
(Selection)
ICM, S-CO, G-CO, L-CO, PDN, SDN
( When ICM is selected)
Station Programming
AUTO DIAL
STORE
Press STORE.
The STORE indicator lights.
The display shows the initial
programming mode.
91