Panasonic KX-TD500 User Manual page 330

Station Features and Operation (PT/SLT)
• After dialing the feature number or pressing the CO button, you will hear one of the
following tones:
Dial tone: Indicates an idle CO line is seized.
xxxxx
—is shown on the display, if available. (xxxxx: trunk port physical number)
Busy tone: Indicates the selected CO line is busy.
CO in use
—is shown on the display, if available.
Reorder tone:
1) Indicates the CO line you have attempted to access is not assigned.
CO Not Assigned
—is shown on the display, if available.
2) Indicates access to CO lines is denied.
Restricted
—is shown on the display, if available.
Restricted
•
—The extension has been locked by the owner (Electronic Station Lockout) or the
operator / manager (Remote Station Lock Control).
—The extension is restricted by the account code mode, "Verified - All Calls" or "Verified
- Toll Restriction Override" (Account Code Entry).
—The extension is restricted from making toll calls (Toll Restriction).
• The same CO line can be assigned to an S-CO button and a G-CO button.
• The same trunk group can be assigned to more than one G-CO button.
• Each PT can have more than one L-CO button.
• Ringing Tone Selection
The Digital Proprietary Telephone (DPT) user can choose a desired ringing frequency for
each S-CO, G-CO or S-CO button <Section "2.2.13 Ringing Tone Selection for CO
Buttons" in the User Manual>.
• Idle Line Preference – Outgoing (PT only)
If a CO button (S-CO, G-CO or L-CO) is selected in "Idle Line Preference – Outgoing"
setting by Station or System Programming, the PT user can get an idle CO line simply by
going off-hook.
• Automatic Callback Busy (Camp-On)
If the CO line which you try to access is busy, the system will inform you when the CO line
becomes free.
• Hands-free operation
When you press a CO button (S-CO, G-CO or L-CO) button directory, the hands-free
operation mode is established and can perform on-hook dialing.
330
may show on the display for the following reasons.
User Manual