Step One: Assess Wind Conditions And Clear Work Area - NorthStar 1572210 Owner's Manual

Step 1: Assess wind conditions and clear work area.
Before you decide to spray, you must determine whether wind conditions are suitable. You must
also restrict access to the work area to ensure the safety of bystanders.
Do not spray if wind speeds are greater than 5 MPH or if there are bystanders in
the intended spray area.
1. Assess wind speed
2. Clear work area
3. Prep work area
Operation – Using the Sprayer
WARNING
Assess weather conditions to ensure that it is not too windy to spray.
DO NOT SPRAY if wind speeds are greater than 5 MPH.
Visible indication of wind speed:
If leaves are in constant motion or there is any branch movement, DO NOT
spray because the wind is too strong.
Clear the work area of all bystanders and pets.
Restrict access by the public for the period recommended on chemical labels.
Complete the following before spraying:
a) Cover all electrical outlets and light fixtures on surfaces to be sprayed.
b) Remove any decorations in proximity to spray area.
c) Using fresh water from a garden hose, soak any vegetation that may come
into contact with soft wash mix. If cleaning roof with gutters, soak area
around downspouts with fresh water.
20