Table of Contents

Advertisement

1. Motor Armor System. This system will shut the pump off in the event of a leak inside the
pump cartridge to prevent damage to the motor.
2. ON/OFF Switch. Allows the operator to turn the pump on and off.
3. LED. Red LED illuminates when there is a fluid leak inside the pump cartridge.
4. Pressure Switch. The pressure switch reacts to pressure, and interrupts power at the preset
shut-off pressure indicated on the pump label. When outlet pressure drops below a
predetermined limit, the switch will close, and the pump operates until the shut-off pressure
is achieved. The shut-off pressure is set to factory calibrated standards.
5. Quick Connect Ports. Allows quick and easy fitting removal.
6. Pump Cartridge. The portion of the pump that moves fluid. Quickly and easily replace the
low-cost consumable pump cartridge once it is worn or leaking.
7. Spray Gun. Use the spray gun to apply chemical to specific areas. When the pump
ON/OFF switch is in the ON position, the spray gun trigger is the pump ON/OFF control.
Squeeze the trigger and the pump turns on, let go and the pump turns off.
8. Spray Nozzle. Quick connect allows easy change to different nozzle tips.
9. Wire Harness. The wire harness connects the battery to the pump. The in-line switch
allows the operator to turn the pump on and off.
10. Suction Strainer. The suction strainer protects the pump from debris and has a clear
removable bowl for easy cleaning.

Features

14

Advertisement

Table of Contents
loading

This manual is also suitable for:

15722121572213

Table of Contents