Setup Menus; System Menu - Panasonic AJ-LT95 Operating Instructions Manual

Setup menus

SYSTEM menu

Item
Superimposed
No.
display
11 SYS SC
13 VIDEO PHASE
16 AV PHASE
17 SYS H RANGE
18 SYS H OFFSET
30 MENU LOCK
70 P.ON LOAD
The underlining indicates the factory setting.
Setting
Superimposed
No.
display
0000 –127 This is for adjusting the system phase. The total variable range is
at least ±180 degrees.
0127 0 –: The phase is advanced.
+: The phase is delayed.
0255 128
0000 –32 This is for adjusting the video signal phase (in 148 ns steps).
–: The phase is advanced.
0032 0 +: The phase is delayed.
0064 32
0000 –90 This is for adjusting the phase of the audio output with respect to
the video output signals (in 20.8 µs steps).
0090 0 –: The audio output phase is advanced ahead of the video output.
+: The audio output phase is delayed from the video output.
0180 90
This selects the SYSTEM H variable range.
0000 FULL 0: ±8 µs
0001 FINE 1: –2.0 µs to +2.7 µs
This selects the SYSTEM H center position.
0000 –3 0: –13.4 µs
0001 –2 1: –8.96 µs
0002 –1 2: –4.52 µs
0003 0 3: 0 µs
0004 1 4: +4.52 µs
0005 2 5: +8.96 µs
0006 3 6: +13.4 µs
This selects the setup menu lock mode.
0000 OFF 0: The lock is released (enabling changes to be made).
0001 ON 1: The lock is engaged (prohibiting changes).
This is for establishing the setting that changes the setup menu
settings to the user's initial settings when the power is turned on.
0000 OFF 0: The setup menu settings remain unchanged.
0001 ON 1: The setup menu settings are changed.
31
Description of setting
V V
T T
R R
1 2
[ [
[ [
[ [
[ [
[ [
[
[