(1)
Installing Guide Rails
1. When installing guide rails, the guides
must face forward and inward. (Put
front spacer in front side of the rack, and
put rear spacer in back side of the rack.)
Insert the projection portion of rear
spacer of guide rails into rack support
holes. (See ①)
2. Secure the holes at the top and bottom
of rear spacer with screws from the
outside of rack support.(See ②)
3. Mount guide rails inside rack support in
front side, and secure the upper and
lower holes with screws. (See ③)
The front and the rear mounting positions must be level. Use the
Note
numeric impressed on the mounting section as guidance.
Express5800 Series 17.3-inch LCD Console Drawer (1port) User's Guide
②
①
Depth of
Guide rail
600~865mm
③
(Top v iew of installing guide rails)
Rear spacer
Rear of
②
the rack
Set screws
Set screws
①
Guide rail
②
Rear
spacer
Rear spacer
②
Set
screws
Rack support
f or the rear
Rack support f or the f ront
Set screws
②
Rack supports f or the rear
Projection portion
Rear spacer
Guide rails
445.4mm
Front spacer
Rack supports f or the f ront
Set screws
Rack support f or the rear
Rack support f or the f ront
Guide rail
①
Front
spacer
Guide f or
guide rails
Front
spacer
Set screws
Set
screws
③
③
Front of
the rack
Front
spacer
(Installing guide rails)
①
③
Set screws
③
53