Panasonic WORKIO DP-CL21 Setup Manual page 23

Setup
For Mac OS X 10.1 - Mac OS X 10.2
Step 1: Installing the DP-CL21M PPD
(PostScript Printer Description) file
and ColorSync profile
1
Insert the DP-CL21M CD-ROM disk in your CD-ROM
drive, and then double-click the DP-CL21M icon,
Mac OS X, English folder.
2
Double click the DP-CL21M Install icon.
3
Follow the instructions to complete the installation.
NOTE:
• If you want to print Classic application documents, you
are required to install the DP-CL21M software for Mac
OS 9.2, then set the computer and printer. Refer to "For
Mac OS 8.1-Mac OS 9.2" in this section.
Setting the Computer (and Printer)
Set the computer (and printer) depending on the interface:
network (see below) or USB (see page 25).
■ When using the Network Interface Cable
The following are the steps to set up network printing
using AppleTalk and TCP/IP.
Step 1: Setting up AppleTalk and TCP/IP on the computer
Step 2: Setting up TCP/IP on the printer
Step 3: Setting the PostScript printer driver
Step 1: Setting up AppleTalk and TCP/IP on
the computer
If the AppleTalk and TCP/IP of your computer are already
set, proceed to the next step. If they are not set, consult
with your network administrator. Regarding the
configuration of TCP/IP, refer to the help menu or
documentation for Macintosh.
NOTE:
• Refer to "Network" section in the Operating Instructions
about setting the AppleTalk and TCP/IP to your
Macintosh.
Step 2: Setting up TCP/IP on the printer
You need to set the IP Address, Subnet Mask and Default
Gateway for the printer. It can be set by using one of the
following three methods.
• Using the DHCP server
• Using the Network Setup Tool
• Using the Printer Panel
If the administrator manages the network with DHCP
server, it will automatically assign an IP Address, Subnet
Mask and Default Gateway. These can be viewed by
printing out the configuration page (see below).
For the instructions of another method, refer to "Network"
section in the Operating Instructions (see "Using the
Manuals" on page 27).
1
Turn the printer on (see "Power On" on page 28).
2
Press MENU/EXIT (PAUSE) button on the printer
panel.
3
Press (CONTINUE) button until Test Page menu
appears.
4
Press ENTER button.
Menu Map item menu appears.
5
Press (CONTINUE) button until Configuration
Page item menu appears.
6
Press ENTER button.
The configuration page will be printed.
7
Confirm the IP Address and MAC Address on the
configuration page.
23