Panasonic WORKIO DP-CL21 Setup Manual page 20

Setup
6-C
(For Windows 2000)
(1) Click [Next>].
(2) Click on the Search for a suitable driver for my
device(recommended) check button and click
[Next>].
(3) Confirm the Specify a location is checked and click
[Next>].
(4) Click [Browse...] and select PCL folder [D (CD-ROM
drive letter):\Win2000\ENGLISH\PCL] or
PS folder [D (CD-ROM drive
letter):\Win2000\ENGLISH\PS]. Click [Open]. Click
[OK].
(5) Click [Next>].
(6) If the Digital Signature Not Found window is
displayed, click [Yes].
(7) Click [Finish].
7
(8) Proceed to step on page 21.
20
6-D
(For Windows XP)
(1) Click on the Install from a list or specific location
(Advanced) check button and click [Next>].
(2) Click on the Search for the best driver in these
locations check button and Include this location in
the search check box and remove the check mark of
the Search removable media (floppy, CD-ROM...)
check box and click [Browse].
(3) Select PCL folder [D (CD-ROM drive
letter):\WinXP\ENGLISH\PCL] or PS folder [D (CD-
ROM drive letter):\WinXP\ENGLISH\PS]. Click [OK].
(4) Click [Next>].
(5) If the Hardware Installation window is displayed, click
[Continue Anyway].
(6) Click [Finish].
7
(7) Proceed to step on page 21.