Table of Contents
Advertisement
To install a new hard disk drive:
1
Place the printer controller board on a stable surface.
2
Insert the provided cable into the connector on the
printer controller board, directing a projection on the
cable against the groove in the connector.
Slide the cable until the click is heard.
3
Unpack the new hard disk drive. With the electrical
circuit board side up, place the drive on a flat surface or
on the palm of your hand.
Do not touch the drive with magnetic objects or place objects
sensitive to magnets near the drive.
4
Screw the four stand offs in the back of the hard disk
drive.
Cable
Hard disk drive
Options
Projection
197
Advertisement
Table of Contents
