Image Area; Clearing Media Jams - Panasonic KX-P8420 Operating Instructions Manual

Image Area

Clearing media jams

Jam in location B
(See page
Jam in the MPT
(See page 166.)
Jam in location A
(See page 154.)
Last —It shows the percentage of the whole printable area covered by each
toner in the previously printed page. This menu cannot show the value
correctly just after the printer was turned on.
•
CYAN: ###%
•
MAGENTA: ###%
•
YELLOW: ###%
•
BLACK: ###%
Average —It shows the average percentage of the printable area of all
pages printed covered by each toner.
•
CYAN: ###%
•
MAGENTA: ###%
•
YELLOW: ###%
•
BLACK: ###%
If the printer has frequent media jams, make sure that you follow these
guidelines:
•
Always use high-quality laser paper and transparencies. See
and 209.
•
Make sure that you load specialty media only in the multi-purpose tray
and that you set the media thickness switch to the correct setting for the
media used.
If a media jam occurs, the printer panel reports
<LOCATIONS>
A through E in the illustration below.
156.)
are the various sensors throughout the paper path, shown as
Jam in location C (See
Care and Maintenance
JAM AT <LOCATION>
page
Jam in location E
(See page
Jam in location D
(See page 164.)
2nd cassette feeder (option)
pages 207
, where
157.)
166.)
153