Related Manuals for Shark UV900 Series
Summary of Contents for Shark UV900 Series
- Page 1 DuoClean PowerFins HairPro ® ® ™ Lift-Away with Self-Cleaning Brushroll ® and Odor Neutralizer Technology Upright Vacuum UV900 Series OWNER’S GUIDE...
-
Page 2: Important Safety Instructions
FRAGRANCE CARTRIDGE FIRST AID cleaner. Store your vacuum cleaner 23. Your Shark® vacuum may not Cleaning and user maintenance shall with the power cord secured around a) Avoid contact with fabrics and be designed to stand up on its own. -
Page 3: Power Cord
ASSEMBLY ASSEMBLY (Click) (Click) Upper Cord Hook (Turn to Tool Storage Click) Posts Lower Cord Hook (Click) (Click) POWER CORD 1. Place Pod down onto Nozzle. 2. Insert Wand into Pod. 3. Insert Handle into wand. 4. Attach Hose to back of pod. 5. - Page 4 TECHNOLOGY SETTINGS ODOR NEUTRALIZER TECHNOLOGY SETTINGS ODOR CARTRIDGE REPLACEMENT 1. REMOVE ODOR DIAL 2. REMOVE OLD ODOR FROM NOZZLE CARTRIDGE ODOR DIAL Flip up the handle and rotate the dial clockwise Rotate the cartridge counterclockwise Flip up the dial handle and rotate the odor dial until the two teal arrows are aligned.
-
Page 5: Cleaning Modes
WHOLE-HOME CLEANING WHOLE-HOME CLEANING SETTINGS CLEANING MODES POWER/SURFACE SWITCH SUCTION CONTROL UPRIGHT MODE LIFT-AWAY MODE The Suction Control Slider located on the To engage Brushrolls, select a Select surface setting: Step on the pedal on the floor handle allows you to adjust the suction surface setting, step on floor nozzle nozzle to lift off the pod. -
Page 6: Emptying The Dust Cup
EMPTYING THE DUST CUP CLEANING THE FILTERS IMPORTANT: Unplug the power cord before performing any maintenance. Regularly rinse and replace the filters to maintain your vacuum's suction power and to maximize the effectiveness of the odor neutralizer technology. Rinse filters with cold water only. Allow all filters to air-dry for at least 24 hours before Empty the dust cup each time you vacuum and periodically during cleaning, reinstalling them to prevent liquid from being drawn into electronic parts. -
Page 7: Checking For Blockages
MAINTENANCE CHECKING FOR BLOCKAGES NOZZLE MAINTENANCE SELF-CLEANING BRUSHROLL If any hair is wrapped around the brushroll, continue vacuuming, using Carpet/Low Pile mode on a bare floor surface, a low-pile carpet, or a small area rug. This will allow the self-cleaning brushroll to remove the hair wrap and send it to the dust cup. -
Page 8: Included Accessories
INCLUDED ACCESSORIES TROUBLESHOOTING Power cord caught in brushrolls or floor nozzle. Pet Crevice Tool • To minimize the risk of power cord damage, DO NOT run the vacuum over the power cord. This versatile, slender 8” tool removes If this occurs, immediately shut off power to the vacuum and remove the cord from the pet hair from hard-to-reach spaces brushrolls or nozzle. -
Page 9: Five (5) Year Limited Warranty
SharkNinja will cover the cost for the customer to send in the unit to us for repair or replacement. A fee of $25.95 (subject to change) will be charged when SharkNinja ships the repaired or replacement unit. 2. Manufacturer: Shark Ninja 89 A Street Needham, MA 02494 How to initiate a warranty claim 3. - Page 10 NOTES NOTES s h a r kc l e a n . c o m s h a r kc l e a n . c o m...
- Page 11 PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE. This Owner’s Guide is designed to help you get a complete understanding of your new Shark® DuoClean® PowerFins® HairPro™ Lift-Away® with Self-Cleaning Brushroll and Odor Neutralizer Technology Upright Vacuum. SharkNinja Operating LLC...
Need help?
Do you have a question about the UV900 Series and is the answer not in the manual?
Questions and answers
Does the uv9000 stand up alone? I have a shark now and it has to lean on something to stand up
The manual states that the Shark UV900 Series vacuum "may not be designed to stand up on its own."
This answer is automatically generated
main roller stopped turning
The main roller on the Shark UV900 Series may have stopped turning due to the following reasons:
1. Incorrect Surface Setting: Ensure the vacuum is set to the correct surface mode (Carpet or Hard Floor) and that the brushroll is engaged.
2. Suction Control Slider: If the suction is too high, it may prevent the brushroll from turning. Adjust the Suction Control Slider for better performance.
3. Blockage or Debris: Check for debris or hair wrapped around the brushroll, which may prevent it from spinning.
4. Failure to Step on the Pedal: To engage the brushroll, step on the floor nozzle pedal and tilt the handle back firmly.
5. Required Maintenance: Failure to clean the brushroll regularly may cause it to stop functioning.
6. Damage or Wear: If the brushroll is damaged or excessively worn, it may need replacement.
If none of these solutions work, further troubleshooting or contacting SharkNinja support may be necessary.
This answer is automatically generated