24. Turn off all controls before plugging 2. Use only identical replacement parts. in or unplugging the vacuum. 19. When powered on, keep the 11. Only use Shark® branded filters vacuum cleaner moving over the 3. Carefully observe and follow and accessories. Failure to do so 25.
ASSEMBLY CLEANING MODES (Click) UPRIGHT ABOVE-FLOOR WITH WAND To clean floors, place foot on floor nozzle Detach the wand for more reach to clean and tilt handheld vacuum back. baseboards, ceiling fans, window sills, and other (Click) hard-to-access areas. Stand the vacuum upright, then step on the foot pedal on the left side of the floor nozzle and pull the wand up to disconnect it.
STORAGE AVAILABLE ACCESSORIES ONBOARD HOOK WALL MOUNT NOTE: Not all accessories come with all units. Please see the enclosed Quick Start Guide for your unit's configuration. To order additional accessories, visit sharkaccessories.com. 12" Crevice Tool Clean in tight spaces or reach baseboards and ceilings with this slim crevice tool.
MAINTENANCE MAINTENANCE IMPORTANT: Unplug the vacuum before performing any maintenance. IMPORTANT: Unplug the vacuum before performing any maintenance. EMPTYING THE DUST CUP CLEANING FILTERS The dust cup needs to be emptied each time you vacuum and periodically during cleaning, when debris in Perform regular maintenance on the filters to keep your vacuum's suction power optimal.
MAINTENANCE MAINTENANCE CHECKING FOR BLOCKAGES NOZZLE MAINTENANCE CLEANING THE SELF-CLEANING BRUSHROLL If any hair is wrapped around the brushroll, continue cleaning, using Carpet mode on a bare floor surface, a low-pile carpet, or a small area rug. This will allow the self-cleaning brushroll to remove the hair wrap and send it to the dust cup.
TROUBLESHOOTING Vacuum is not picking up debris. No suction or light suction. (Refer to Maintenance section for more information.) FIVE (5) YEAR LIMITED WARRANTY • Check filters to see if they need cleaning. Follow instructions for rinsing and completely air-drying the filters before reinserting in the vacuum.
REGISTER YOUR PURCHASE Benefits of registering your product and NOTES creating an account: registeryourshark.com • Get easier, faster product support and access to warranty information Scan QR code using • Access troubleshooting and product care mobile device instructions • Be among the first to know about RECORD THIS INFORMATION exclusive product promotions Model Number: ������������������������...
Page 9
PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE. This Owner’s Guide is designed to help you get a complete understanding of your new Shark® Rocket® DuoClean® with Self-Cleaning Brushroll Corded Stick Vac. SharkNinja Operating LLC US: Needham, MA 02494 CAN: Ville St-Laurent, QC H4S 1A7 1-800-798-7398 sharkclean.com...
Need help?
Do you have a question about the Rocket DuoClean UV480 Series and is the answer not in the manual?
Questions and answers
I need a replacement part for the metal wand with upper and lower plastic attachments, unless you have a replacement for the upper broken plastic part
Replacement parts, including the metal wand with upper and lower plastic attachments, are available for purchase at sharkaccessories.com.
This answer is automatically generated