Panasonic BB-GT1500 Operating Instructions Manual page 72

A Service
– a ringer ID of a handset phonebook
item, the ringer set on page 53 is
used instead
– the alarm, "Tone 1" is used
instead
L Downloaded ringtones are
temporarily stored in the base unit.
When a 4th ringtone is downloaded to
the base unit, it replaces the oldest
one. All ringtones will be erased by
pressing {IP RESET} (page 76).
A text messages N
You can view the A text messages
using a handset.
The unit can receive a maximum of 88
messages. The number of received
messages may decrease depending on
the size of each message as follows:
Size of message
*1
320 characters
12 or less
characters
*1 The maximum number of characters
per message
Note:
L The unit erases the oldest message
when the message memory is full. We
recommend you protect the
messages you want to keep (page
72).
Viewing A text messages
When new text messages have been
received:
– "New joip message" is displayed if
the A text message alert is on
(page 73).
– The message indicator on the handset
also flashes slowly if both the A text
message alert and the message alert
72
For product assistance, visit www.panasonic.com/help
Maximum
number of
messages
14
88
For A assistance, visit www.joip.com
for the Voice Mail or answering
system are on (page 64, 66).
1
{MENU} i {#}{3}{6}{0}
L The numbers of the new
messages and total messages
are displayed.
2
{V}/{^}: Select the desired item.
i {OK}
L To view another text message,
press {BACK} and repeat step 2.
3
{OFF}
Note:
L A Q is displayed in the message list
for a message which has already
been viewed by any handset.
L If an arrow (>) is displayed, some
information is not shown. Push the
joystick right to see the remaining
information. To return to the previous
display, push the joystick left.
L "New joip message" disappears
from all handset displays after viewing
all new A text messages.
Protecting a A text message
You can protect a maximum of 8
messages. When the message memory
is full, protected messages are not
erased until you release the protection.
Press {PROTECT} while viewing a
message.
L To release the protection, press
{PROTECT} again.
Erasing a A text message
1
While viewing the message list or
message, press {ERASE}.
2
{V}/{^}: "Yes"
3
{SELECT} i {OFF}
Erasing all A text messages
You can erase all text messages except
protected messages (page 72).