Sync; Sdi Through; Input Signal Display - Panasonic Viera TH-50VX100 Operating Instructions Manual

SYNC

Select SIGNAL from the "SET UP" menu during RGB input signal.
SIGNAL
SYNC AUTO
XGA MODE 1024 ×768
REFRESH RATE 100 Hz
Setting RGB sync signal
Confirm that the input is set to RGB INPUT (this setting is valid only for RGB INPUT signal)
The H and V sync or synchronized signal are automatically selected. If both input, it is selected the H and V
AUTO:
sync.
Uses a synchronized signal on the Video G signal, which is input from the G connector.
ON G:
Uses a synchronized signal of Composite Sync input, which is input from the HD connector.
VBS:

SDI THROUGH

Set the active through function of the Dual Link HD-SDI Terminal Board (TY-FB11DHD).
Note:
Settings can only be performed for this menu when a slot mounted with a Dual Link HD-SDI Terminal Board (TY-FB11DHD)
is selected.
SIGNAL
SDI THROUGH OFF
REFRESH RATE 100 Hz

Input signal display

Displays the frequency and the type of the current input signal.
This display is valid only for COMPONENT/RGB/PC and Digital input signal.
Display range:
Horizontal 15 - 110 kHz
Vertical 48 - 120 Hz
The dot clock frequency is displayed during digital signal input.
[ RGB ]
2
1
AUTO
[ Digital ]
2
1
OFF ON
ON: Enables active through.
OFF: Disables active through.
SET UP for Input Signals
change
select
ON G VBS
change
select
H-FREQ. 33.7 kHz
V-FREQ. 60.0 Hz
SIGNAL FORMAT 1125(1080)/60i
H-FREQ. 33.7 kHz
V-FREQ. 60.0 Hz
DOT CLOCK-FREQ. 108.0 MHz
SIGNAL FORMAT 1125(1080)/60i
41