Set Up For Input Signals; Component / Rgb In Select; Yuv / Rgb In Select - Panasonic Viera TH-50VX100 Operating Instructions Manual

SET UP for Input Signals

COMPONENT / RGB IN SELECT

Select to match the signals from the source connected to the COMPONENT / RGB input terminals.
Y, P , P signals "COMPONENT"
B R
RGB signals "RGB"
Display the menu screen.
1
Select "SET UP".
2
PICTURE
SET UP
POS. /SIZE
SOUND
Select "COMPONENT / RGB-IN SELECT" and set.
3
SIGNAL
SCREENSAVER
COMPONENT/RGB-IN SELECT
EXTERNAL SCALER MODE
POWER SAVE
4
Exit the menu.
Notes:
• Selection may not be possible, depending on which optional board is installed.
• Make setting of the selected input terminal (SLOT1, SLOT2, SLOT3 or PC IN).

YUV / RGB IN SELECT

Select to match the signals from the source connected to the DVI input terminals.
YUV signals "YUV"
RGB signals "RGB"
Display the menu screen.
1
Select "SET UP".
2
PICTURE
SET UP
POS. /SIZE
SOUND
Select "YUV / RGB-IN SELECT" and set.
3
SIGNAL
SCREENSAVER
YUV/RGB-IN SELECT
EXTERNAL SCALER MODE
POWER SAVE
4
Exit the menu.
Notes:
• Selection may not be possible, depending on which optional board is installed.
• Make setting of the selected input terminal (SLOT1 or SLOT2).
RGB
OFF
COMPONENT
OFF
RGB
OFF
YUV
OFF
2
OK
1
select
change
2
1
select
RGB
or
2
OK
1
select
change
2
1
select
RGB
or
39