Specifying The Scaler - Panasonic Viera TH-50VX100 Operating Instructions Manual

Specifying the scaler

This menu can be used to specify whether the built-in scaler or an external scaler is used for scaler functions such as
resizing and picture quality adjustment.
The setting is valid with the following input signals.
1125 (1080) / 24p·25p·30p·50p·60p
Display the menu screen.
1
Select "SET UP".
2
PICTURE
SET UP
POS. /SIZE
SOUND
Select "EXTERNAL SCALER MODE" and set.
3
SIGNAL
SCREENSAVER
COMPONENT/RGB-IN SELECT
EXTERNAL SCALER MODE
POWER SAVE
STANDBY SAVE
POWER MANAGEMENT
AUTO POWER OFF
OSD DESIGN
OSD POSITION
OSD LANGUAGE
4
Exit the menu.
36
RGB
OFF
OFF
OFF
OFF: Use the built-in scaler.
ON
ON: Use an external scaler.
OFF
OFF
Note:
TYPE1
Selecting "ON" in this setting deactivates the following settings and disables
UPPER LEFT
these operations.
ENGLISH ( US )
POS. /SIZE menu:
PICTURE menu:
ADVANCED SETTINGS: 3:2 PULLDOWN, NOIZE REDUCTION (see page
SIGNAL menu:
OPTIONS menu:
ASPECT Controls (see page 18)
"EXT. SCALER" is displayed in the menu screen to indicate that an external
scaler is in use.
NORMAL IZE
PICTURE MENU
PICTURE
BRIGHTNESS
COLOR
TINT
2
OK
1
select
change
2
1
select
ON
H-SIZE, V-SIZE, 1:1 PIXEL MODE, DISPLAY SIZE
(see page 31, 32)
BRIGHTNESS, COLOR, TINT, SHARPNESS,
MEMORY SAVE, MEMORY LOAD (see page 22,
26, 27)
24)
XGA MODE (see page 40)
All Aspect (see page 42)
EXT.SCALER
STANDARD
25
or
SIGNAL
SCREENSAVER
COMPONENT/RGB-IN SELECT
RGB
EXTERNAL SCALER MODE OFF
POWER SAVE OFF
STANDBY SAVE ON
POWER MANAGEMENT OFF
AUTO POWER OFF OFF
OSD DESIGN TYPE1
OSD POSITION UPPER LEFT
ENGLISH ( US )
OSD LANGUAGE