Printing Multicolored Objects (Without Mmu3) - Prusa Research Original Prusa MK4 Handbook

6.5.7. Printing Multicolored Objects (without MMU3)

If you want to have a print with layers in different colors, it can be easily set up directly in
PrusaSlicer - follow the instructions below.
1. Switch to the layer view (Preview) using the button in the left bottom corner.
2. Use the slider on the right to select the layer in which you want to change the color.
3. Click on the orange icon with the plus sign.
4. An immediate preview will appear. You can undo the color change by clicking on the gray
cross which will appear instead of the orange plus sign.
5. Export the G-code and you can start printing!
Once the printer reaches the layer, where the color change should happen, the printer will pause
and display a prompt on the screen. Follow the instructions on the screen to finish the filament
change.
47