Table of Contents
Advertisement
Synchro Editing
(S-VHS/ VHS M ode
O nly)
Recorder
Player
Camcorder
Downloaded from:
https://www.usersmanualguide.com/
SYNCHRO EDIT
connector
LANC Cable
(not provided)
To LANC connector
The Synchro Editing function synchronizes the start of the
playback and recording operations when starting an edit
operation using a camcorder with LANC connector and your
video recorder.
MAKE CO N N ECTIO N S
Connect your recorder to camcorder (
1
connect your recorder's SYNCHRO EDIT connector to
the camcorder's LANC connector.
SET RECO RDIN G MO DE
Set the appropriate recording mode (S-VHS or VHS)
2
(
pg. 23).
SET RECO RDER' S IN PUT
MO DE
Set the appropriate input mode, depending on the
3
connectors being used in step 1 .
SET EDIT MO DE
See "Picture Control" on page 49.
4
LO CATE ST ART PO IN T
Start playback of the tape in the camcorder, and pause
5
playback when you find the point where you want to
start editing. Press and hold PAU SE and press RECO RD
on your recorder so that the recorder enters the Record-
Pause Mode.
ST ART SYN CHRO EDITIN G
Press SYN CH RO ED IT .
6
P AUSE SYN CHRO EDITIN G
Press SYN CH RO ED IT again.
7
● Repeat steps
5 – 7 as necessary.
N O TES:
● The Synchro Editing function is impossible with the connec-
tion using DV connector.
● The Synchro Editing function may not work with the initial
part of a camcorder tape.
● The Synchro Editing function cannot be used when using the
J LIP function. (Pressing SYN CH RO ED IT cancels the J LIP
function.)
● The Synchro Editing function may not work properly with
some type of camcorder.
● When you select EDIT to dub tapes in step
AUTO (or NORM when B.E.S.T. is set to OFF) after you finish
dubbing the tapes.
55
EN
pg. 50), and
4 , be sure to select
Advertisement
Table of Contents
