Table of Contents
Advertisement
46
EN
Remote
Control
Functions
Remote control code switch
VCR
1
2
N U M BER "1"
1
2
Downloaded from:
https://www.usersmanualguide.com/
– –:– –
1
2
3
4
5
6
3
4
7
8
9
4
0
3
O K
SPECIAL FEATU RES
Remote A/ B Code Sw itching
The remote control is capable of controlling two J VC video
recorders independently; one set to respond to the remote
control's A code control signals and another set to respond to B
code control signals. The remote control is preset to send A
code signals because your video recorder is initially set to
respond to A code signals. You can easily modify your video
recorder to respond to B code signals.
SET REMO TE CO N TRO L
CO DE
Slide the remote control code switch on the recorder to
1
"B".
AN D
Press and hold VCR on the remote control for over 2
seconds, press the N U M BER key "2" and then press O K .
N O TES:
● To set the recorder back to respond to A code signals, repeat
the same procedure as shown above, except sliding the
remote control code switch to "A" and pressing N U M BER key
"1" instead of "2" in step 1 .
● If you don't want to control the recorder by the remote
control, slide the remote control code switch to "OFF".
Advertisement
Table of Contents
