Table of Contents
Advertisement
A
TV Receiver
(AV mode)
21-pin SCART Cable
(not provided)
C
TV Receiver
(AV mode)
S-Video Cable
(provided)
21-pin SCART Cable
(not provided)
N O TES:
● All necessary cables can be obtained from your dealer.
● For Y/C signal input/output, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.
● When you select EDIT to dub tapes in step
dubbing the tapes.
● When you use this recorder as the player for editing, be sure to set "O.S.D." to "OFF" before starting (
● If you are using another recorder with S-Video and Audio input/output connectors, you can connect those connectors to this
recorder's S-VIDEO and AUDIO input/output connectors.
When Using Your Video Recorder As The Source Player ...
... connect its rear panel S-VIDEO and AUDIO output connectors to the recording deck's S-Video and Audio input connectors.
When Using Your Video Recorder As The Recording Deck ...
... connect its rear panel S-VIDEO and AUDIO input connectors to the source player's S-Video and Audio output connectors.
Then, set the recorder's input mode to "S-1".
Downloaded from:
https://www.usersmanualguide.com/
Your recorder
Player
21-pin SCART
Cable (provided)
Another recorder
Recorder
Your recorder
Recorder
21-pin SCART
Cable (provided)
Another recorder
Player
4 , be sure to select AUTO (or NORM when B.E.S.T. is set to OFF) after you finish
B
Your recorder
Recorder
21-pin SCART
Cable (provided)
Another recorder
Player
53
EN
TV Receiver
(AV mode)
21-pin SCART Cable
(not provided)
pg. 11).
Advertisement
Table of Contents
