Advertisement
N68-22 Cabinet Installation Guide
If...
Any label on a case becomes red, as shown
by part 2 in
Figure 3-1 Shockwatch label
Step 4 Stop unpacking the cases. Ask the project supervisor to send the Cargo Problems Report that is
signed by the customer to the local Huawei office within three days.
Step 5 Check whether the cases are intact.
If...
Any case is seriously damaged or soaked
The cases are intact
Step 6 Stop unpacking the cases, find out the causes, and contact the local Huawei office to further
handle the problem.
To protect the equipment and find out the causes, perform the following actions: Move the
unpacked equipment indoors for proper storage, take photos of the storage environment, the
rusted or corroded equipment, packing cases, and packing materials. Keep these photos for future
verification. Store the packing cases and materials properly.
Issue 01 (2013-01-30)
Figure 3-1
CAUTION
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Preparing for the N68E-22 Cabinet Installation
Then...
The case has been hit by a force greater than
50g (g is the standard gravity) during
transportation. Such hit damages the cabinet or
boards in the case. To handle this problem, go
to
Step
4.
Then...
Go to
Step
6.
Go to
Step
7.
8
Advertisement
