Table of Contents
Advertisement
2
Laying Out and Printing Photos
Turning On Your System
1. Press the switch on the back of the Gemini case up into the
A-2-1
After you've prepared your digital image files (as described in Chapter 1),
you're ready to turn on the Gemini system and lay out and print your
photos in EPPLayout. Follow the steps in these sections:
• "Turning On Your System" below
• "Laying Out Your Photos" on page 2-2
• "Printing Your Photos" on page 2-20
Follow these steps to turn on the Gemini:
Press the switch
l
up to the
position
It's a good idea to turn off Gemini, wait 5 minutes for it to shut down
completely, and then turn it on again at least once a week to
maintain system stability.
Laying Out and Printing Photos
position.
l
2-1
Advertisement
Table of Contents
