Table of Contents
Advertisement
Control panel lights
All control panel lights flashing
7-4
Troubleshooting
Problem
Unknown error
Response
• You may need to upload your print log
to the central server. The printer stops
operating if you haven't uploaded print
data after every 255 billable prints per
printer. To check to see if this is the
cause of the problem, open the right
front Gemini cabinet door and turn off
the printer by pressing its Operate
button. After a few moments, turn the
printer back on and send a print job to
it. If the lights still flash, upload the
print log as described on page 6-11.
• Turn off the printer and remove any
foreign objects or paper that may be
obstructing print head movement.
Then turn on the printer again. If you
still see error indicators, turn off the
printer and contact EPSON as
described on page 7-13.
Advertisement
Table of Contents
