Polygroup Funsicle Oasis Pool User Manual page 15

3. Carefully slide the horizontal beam set into the sleeves of the pool liner.
NOTE: Make sure the vertical part of the T-Fitting faces down and away from the liner to avoid
puncturing the liner.
4. Repeat Step 2 to connect the rest of the horizontal beams and the T-Fittings.
5. Slide the next set of the horizontal beam with T-Fitting into the sleeve beside the first set (see
following figure). Then, link the open end of the horizontal beam with the T-Fitting of the first set.
Press the push-button while sliding the parts together. Release the push-button for the parts to
snap into place and lock tight.
6. Connect the Easy Link T-Fitting with the last horizontal beam (see following figure).
Horizontal Beam with Easy Link T-Ftting Set
Horizontal
Beam
Easy Link
T-Fitting
15