Polygroup FunSicle Activity Pool Quick Start Manual

Ready. Set. Play.

This Quick Start Guide provides a simple overview to your pool's setup process.

For detailed setup guidelines, important safety information and useful tips, refer to the

enclosed "Funsicle Activity Pool User Guide."

STEP ONE:

Prepare the site.

Locate a clean and flat level area free of stones

or sharp objects.

TIP:

Let the liner sit under the sun for at least

two hours before assembling the rest of the

pool; this allows the liner material to be more

flexible, making it easier for you to attach it to

the beam frame structure.

STEP TWO:

Assemble the pool frame and connect it to the liner.

1. Lay all parts (located in Boxes 2a & 2b) on the ground around the pool liner as shown below:

NOTE: For smaller pools, all metal frame and T-Fitting parts are packed in one box - number 2.

2. Slide the Horizontal Beams into the sleeves of the pool liner.

3. Connect each T-Fitting to the horizontal beams (each should snap into place).

Activity Pool

Quick Start Guide

offers and discounts.

Scan the QR Code.

Table of Contents

Need help?

Do you have a question about the FunSicle Activity Pool and is the answer not in the manual?

Page 1 Ready. Set. Play. This Quick Start Guide provides a simple overview to your pool’s setup process. For detailed setup guidelines, important safety information and useful tips, refer to the enclosed “Funsicle Activity Pool User Guide.” STEP ONE: Prepare the site.
Page 2 2. Install the filtration system as per the enclosed “Funsicle Skimmerplus Filter Pump User Guide.” 3. Continue adding water to your pool and refer to the “Funsicle Activity Pool User Guide” for information and best practices for using, maintaining, draining, storing and/or winterizing your pool.