Polygroup Funsicle Oasis Pool Quick Start Manual

Hide thumbs Also See for Funsicle Oasis Pool:

Ready. Set. Play.

This Quick Start Guide provides a simple overview to your pool's setup process.

For detailed setup guidelines, important safety information and useful tips, refer to the

enclosed "Funsicle Oasis Pool User Guide."

STEP ONE:

Prepare the site.

Locate a clean and flat level area free of stones

or sharp objects.

TIP:

Let the liner sit under the sun for at least

two hours before assembling the rest of the

pool; this allows the liner material to be more

flexible, making it easier for you to attach it to

the beam frame structure.

STEP TWO:

Assemble the pool frame and connect it to the liner.

1. Lay all parts (located in Boxes 2a & 2b) on the ground around the pool liner as shown below:

2. Take one horizontal beam and insert it to one T-Fitting to form a set.

3. Carefully slide the horizontal beam set into the sleeves of the pool liner.

4. Connect the other sets of the horizontal beam with the T-Fitting (each should snap into place).

NOTE:

The Easy Link T-Fitting (located in Box 2b, in a plastic bag with "Easy Link T-Fitting" marking)

should be the FINAL T-Fitting to complete the top frame.

Oasis Pool

Quick Start Guide

offers and discounts.

Scan the QR Code.

Table of Contents

Need help?

Do you have a question about the Funsicle Oasis Pool and is the answer not in the manual?

Page 1 Ready. Set. Play. This Quick Start Guide provides a simple overview to your pool’s setup process. For detailed setup guidelines, important safety information and useful tips, refer to the enclosed “Funsicle Oasis Pool User Guide.” STEP ONE: Prepare the site.
Page 2 2. Install the filtration system as per the enclosed “Funsicle Skimmerplus Filter Pump User Guide.” 3. Continue adding water to your pool and refer to the “Funsicle Oasis Pool User Guide” for information and best practices for using, maintaining, draining, storing and/or winterizing your pool.