Advertisement
S
F
P E C
I L E
Wall Mount Bracket
Structural components (ET-WBC100)
This is a wall mount bracket (Model No.: ET-WBC100) for installing the projector to a wall.
Parts name
Wall mount bracket
Mount cover
Mount cover (L) x 1
Projector mount
bracket kit
Screws
Projector
dropprevention kit
Template sheet
• Store small parts in an appropriate manner, and keep them away from children.
• Tightening torque for the screw is M4: 1.25 ± 0.2 N·m (excluding the flanged screws), M6: 4 ± 0.5 N·m.
• When tightening up the screws, use a tool such as a torque screwdriver. Do not use electric screwdrivers or impact screwdrivers.
Attention
• Installation work should onle be carried out by the certified personnel.
• Do not install in a location that is not strong enough.
• Read the "Installation Instructions" throughly and then preform the operation correctly and safely.
• If products are no longer being used, they should be dismantled and removed by the certified personnel as soon as possible.
• Dispose of the packaging materials properly after taking the product out of it.
As of February 2023
WBC100/PKC300BG_STR_T01_14/02/2023
ET-WBC100/ET-PKC300B
Form (number of parts)
Mount cover (R) x 1
Screw with captive washer (M6×16)
Flanged screw (M4×10)
Screw with captive washer (M6×16)
Wire rope
(3.0 mm [1/8 in] wire diameter,
750 mm [29 17/32 in] length)
Wire rope
(3.0 mm (1/8 in] wire diameter,
660 mm [25 31/32 in] length)
Flat washer (M6)
Anchor Bolt Center (Fall Prevention Wire Attaching Position)
アンカーボルト中心線（落下防止用ワイヤーロープ取付位置）
Wall Mount Bracket Center
壁掛け取付金具中心
Image Center
投写画面中心
DPQP1457ZA/X1
Applications
This wall mount bracket is installed to the wall to support the
entire product.
x 1
In addition to forward/backward and vertical slide adjustment, it
allows vertical and horizontal tilt adjustment and horizontal swing
adjustment of the projector.
These are attached to the wall mount bracket.
This is used to install the projector to the wall mount bracket.
x 1
It consists of a projector mount bracket and a connecting plate.
It allows horizontal slide adjustment of the projector.
x 4
Used to secure the projector mount bracket kit to the projector.
Used to secure the projector mount bracket kit to the wall mount
x 4
bracket.
x 1
x 1
Prevents the projector from falling.
Use one of the two wire ropes.
x 1
x 1
Used to determine positions of the screw holes for securing the
x 1
wall mount bracket to the wall.
TENTATIVE
2/9
Advertisement
