DWORD [ S
3.5.2.
Dump memory area in word format
The Dump Words command dumps memory contents in 16 bit word format.
(See also "DUMP" command).
3.5.3.
DLONG [ S
Dump memory area in long format
The Dump Long Words command dumps memory contents in 32 bit word format.
(See also "DUMP" command).
3.5.4.
DBIT [ S
Dump memory area in bit format
The Dump Bit command dumps memory contents in single bit format.
(See also "DUMP" command).
3.5.5.
DSTACK [
Stack Dump
The Stack Dump command dumps the actual stack area contents. The number of words can be
specified. Using the 'L' flag, the monitor evaluates the frame pointer to get the return address.
Note, that interrupt or far call return addresses differ from that. Specifying only the 'L' starts
dumping four bytes before frame pointer (SPB:RW3).
>dstack l↵
>dstack 10 l↵
... First example shows the stack beginning at (FP-4) up to (SP). The second example shows
32 bytes from (SP-2*16) up to (SP).
DBR [ F
3.5.6.
Dump Register Bank
The DBR command can be used to dump the register bank memory area.
Without parameters, the current active register bank is printed.
A specific bank (0..31) or range can be specified by operands.
>dbr↵
>dbr 9↵
>dbr 9 1a↵
>dbr,1a↵
- 28 -
FUJITSU MB90675-Evaluation Board - User Manual
A
TART
DDR
A
TART
DDR
A
TART
DDR
W
] [ L ]
N
ORD
B
],[ L
IRST
ANK
[ E
A
]]
ND
DDR
[ E
A
]]
ND
DDR
[ E
A
]]
ND
DDR
B
]
AST
ANK
© FUJITSU Mikroelektronik GmbH 1996