Figure 4.11 Select Processor / Control Unit Panel (Step 8); Figure 4.12 Control Unit List (Step 9) - Hitachi 9900 User And Reference Manual

Goto Filter Backup Query Help
.---------------------- Select Processor / Control Unit ----------------------.
|
| Command ===> ___________________________________________ Scroll ===> PAGE
|
| Select processors to change CU/processor parameters, then press Enter.
|
| Control unit number . . : 8000
|
| Log. Addr. -------Channel Path ID . Link Address + ------- |
| / Proc. ID Att. (CUADD) + 1---- 2---- 3---- 4---- 5---- 6---- 7---- 8---- |
| _ PROD Yes 0
| ***************************** Bottom of data ****************************** |
|
|
|
|
|
|
|
|
| F1=Help F2=Split
| F6=Previous F7=Backward
'-----------------------------------------------------------------------------'

Figure 4.11 Select Processor / Control Unit Panel (Step 8)

Goto Filter Backup Query Help
--------------------------------------------------------------------------
Command ===> ___________________________________________ Scroll ===> PAGE
Select one or more control units, then press Enter. To add, use F11.
/ CU Type + Serial-# + Description
_ 7001 3990 __________ ________________________________
S 8000 2105 __________ add 2105 type for 80xx devices
******************************* Bottom of data ********************************
F1=Help F2=Split
F8=Forward F9=Swap

Figure 4.12 Control Unit List (Step 9)

Control unit type . . . : 2105
60 61 62
F3=Exit
F8=Forward
Control Unit List
F3=Exit F4=Prompt
F10=Actions F11=Add
Hitachi Lightning 9900™ User and Reference Guide
Row 1 of 1 More:
63 64 65 66
F4=Prompt F5=Reset
F9=Swap F12=Cancel
Row 40 of 41
F5=Reset F7=Backward
F12=Cancel
> |
|
|
|
|
|
|
67 |
|
|
|
|
|
|
|
|
|
|
65