Table of Contents
Advertisement
Windows 98/98SE/2000/Me
If you're having problems with this unit, check this section to see if you can find a
remedy before contacting a service center for repairs.
Symptoms
Even though
this unit is
connected to a
PC, the PC
does not
recognize this
unit.
The POWER
LAMP does not
light.
The removable
disk icons are
not shown in My
Computer.
The inserted
memory card is
not open.
The memory
card cannot be
used with a
digital camera,
etc.
14
Downloaded from:
TROUBLESHOOTING
Causes
The USB port is set to
Disable.
The USB cable is not
connected correctly.
The driver software is not
installed correctly.
The memory card is not
correctly inserted.
When you use this unit,
memory card is formatted
by the PC.
https://www.usersmanualguide.com/
Remedies
1. Set all devices in the
[universal serial bus
controller] to [Enable]
with the device manager
of OS.
2. Set the USB port to
[Enable] with the PC's
BIOS setting. For details
of the device manager
and BIOS setting, refer
to the PC's instruction
manual.
Connect the USB plugs
correctly again by
checking the connector
form and direction.
Install the driver software
correctly again.
Take out the memory card
and insert it again
correctly.
Format the memory card
again with the device in
which the card will be
used.
Pages
to be
referred
11
11
10
12
12
Advertisement
Table of Contents
