Uninstallation Of Software - JVC HC-CW1F Instructions Manual

To uninstall the driver software if it is no longer required, first disconnect the unit
from the PC, then do the following procedure.
1. Close all open applications.
2. Insert the provided USB driver CD-
ROM into the PC's CD-ROM drive.
3. The installation software starts up
automatically in a few seconds. If it
does not start up, try one of the
following.
Method 1
• Click the [START] button and select
[RUN] from the displayed menu.
• Enter (CD-ROM drive name):
\SETUP.EXE in the displayed dialog
box. (e.g.: D: \SETUP.EXE)
• Click the [OK] button.
Method 2
• Double-click [My Computer].
• Double-click the CD-ROM icon.
• The installation software starts up.
If it does not start up and the CD-
ROM window opens, double-click
[SETUP.EXE].
4. When the installation software starts
up, the operation in Fig. 6 is shown
and then the window in Fig. 7 is
displayed.
In Fig. 7, click [OK]. To stop
uninstallation, click [Cancel].
Note
If the driver software for this unit is
not installed in the PC, the
installation screen for the driver
software is shown (page 10).
5. In Fig. 7, click [OK] to start the
uninstallation of the driver software
(Fig. 8).
6. When the uninstallation is complete,
Fig. 9 is shown. Click [Finish] to end
the installation software.
Note
If you want to use this unit after the
driver software has been
uninstalled, you will have to re-
install the driver software (page 10).
Downloaded from:

UNINSTALLATION OF SOFTWARE

https://www.usersmanualguide.com/
Fig. 6
Fig. 7
Fig. 8
Fig. 9
13