In case of NAVIGO 16"
(1)
Placing the safety wheels in an upward-facing position
Press in the lock pin on the underside with your
finger.
Turn the anti-tip device 180° while the lock pin is
pressed in.
(2)
Placing the safety wheels in a downward-facing position
Press in the lock pin on the top side with your finger.
Turn the anti-tip device 180° while the lock pin is
pressed in.
● Operating the wheelchair when the anti-tip device is removed or not in the correct position
may cause a rollover. Make sure you operate the wheelchair with the safety wheels facing
downwards.
● Only have the safety wheels facing upwards when going over bumps with the assistant op-
erations and other such situations.
● Make sure you return the safety wheels to the correct position after going over the bump.
● A road surface with large depressions can cause a rollover, even if the safety wheels are
facing downwards. When going over bumps, also pay close attention to the condition of
the road surface.
● Even if the anti-tip device is in the correct position, the wheelchair could rollover due to
various factors, such as a bumpy road surface, holes, level differences, and slopes.
Carefully choose routes you use frequently to be sure they are not hazardous.
Safety wheel
WARNING
Lock pin
Lock pin
11
95