Philips ADD5910M User Manual page 11

• Wash drip tray with soapy water. Rinse all soap away with clean water. Allow the drip tray to
air dry.
Note
• Water is a foodstuff. We recommend using the filtered water within 24 hours.
• If the appliance will not be used for an extended period of time(for example, a holiday),
we recommend removing the �lter and placing it in a sealed plastic bag, and then storing it
in the fridge. This will help to maintain the hygiene of the filter. Before using the filter after
storage, follow the preparation and installation instructions for use as normal.
• Always switch off and unplug the appliance before cleaning.
• Ensure the appliance is cooled down before cleaning.
• Do not use scouring pads, solvents or abrasives to clean as they may damage the appliance.
Descaling
• The descale Indicator lights up when the appliance requires the descale process.
• For safe and efficient operation of your appliance, it is important to descale regularly.
• Untreated scale deposits prevent the element conducting heat efficiently and may affect
its performance.
• Ensure the inner water tank and filter are removed before starting the descale process.
Descale Procedure
1. Remove the filter and the inner water tank.
2. Fill water tank with 2 liters of 4% vinegar solution.
3. Place a 2L container under the dispense nozzle.
4. Long press the descale button for 3 seconds. (C-1)
5. The descale indicator will flash and the appliance will run
a descale process. It will take around 5 mins. Caution: dispensed
liquids will be hot.
6. When the water shortage indicator lights up, discard the remaining
citric acid solution, refill the water tank with fresh tap water to the
maximal water level.
7. The appliance will run a cleaning cycle.
8. The descale indicator will turn off once the descaling completes.
07
C-1