HP 37717C Operating Manual page 59

PDH / DSn Testing With The HP 37717C
Frequency Offset Tolerance
2. Set up the
RECEIVE
opposite.
Select the PATTERN required from the
menu.
3. Set up the
RESULTS
opposite.
Any of the other results can be selected
without affecting the measurement.
Continuity Check
Before running the test carry out a continuity test to verify the measurement path.
1. Connect a loopback at the desired point on the line terminal or cross-multiplexer
equipment.
2. Press to start a measurement.
RUN/STOP
3. Press error add SINGLE
display.
RESULTS
4. Press to stop the measurement.
RUN/STOP
display as shown
display as shown
three times and check that the errors are recorded on the
53