HP 37717C Operating Manual page 46

PDH / DSn Testing With The HP 37717C
Cross Multiplexer Testing
2. Set up the
TRANSMIT
shown opposite.
The PAYLOAD TYPE determines the
Framing, which is selected from the
softkey menu.
Selections of Framing and Code must
match those of the network equipment.
3. Set up the
RECEIVE
as shown opposite.
SETTINGS
The GAIN and EQUALIZER settings
should be set to optimize the received
signal.
4. Set up the
RECEIVE
STRUCTURED SETTINGS
opposite.
The required 2 Mb/s test signal is selected
under 34Mb: 8Mb: 2Mb
2M Payload determines the test signal
framing and must match that of the
network equipment.
40
display as
display
MAIN
display
as shown