Advertisement
4
ER-X
Area Ionizer
BAR TYPE HEAD
ER-X008
Effective charge removal width:
80 mm
3.150 in
approx.
ER-X016
Effective charge removal width:
160 mm
6.299 in
approx.
ER-X032
Effective charge removal width:
320 mm
12.598 in
approx.
ER-X048
Effective charge removal width:
480 mm
18.898 in
approx.
ER-X064
Effective charge removal width:
640 mm
25.197 in
approx.
Super-compact slim head
By thoroughly redesigning the discharge needle, we
have created a super-compact slim head that combines
high-speed charge removal*
design*
. The ER-X series can be embedded in, or
2
retrofitted onto, equipment that did not provide enough
space for antistatic measures in the past.
*1: Pulse AC method with built-in air tubes (max. pressure 0.5 MPa)
*2: Discharge needle air barrier structure, discharge needle unit for
simple need replacement
Angle adjustment screw
Flat discharge surface for easy cleaning
The ER-X series heads have a flat discharge face,
allowing effortless cleaning of the discharge needles and
air outlets by simply brushing along the groove provided.
Groove
SERIES
with a maintenance-saving
1
30 mm
30 mm
(1.181 in)
(1.181 in)
adjustment
adjustment
22 mm
22 mm
(0.866 in)
(0.866 in)
Discharge needles
Air outlets
Commercial brush
High and low temperature resistant type head also available
ER-X□HC
Bar type head compatible with ambient temperatures of
-60 to +200 °C
Discharge needle air barrier design for reduced contamination
A barrier of clean air around the discharge needle keeps
foreign matter from adhering to it, preventing degraded
performance. Additionally, by using separate air sources
for the discharge needle barrier and ion transport, the
ER-X series keeps discharge from becoming unstable
due to pressure concentration, allowing the device to
efficiently generate and transport ions.
Air barrier
structure
360-
360-
degree
degree
angle
angle
Carefully designed to prevent
contamination in manufacturing processes
In consideration of the manufacturing process
(secondary cells etc.), the ER-X series heads neither
use copper nor plate processing. This minimizes the risk
of contamination with foreign substances.
Discharge needle unit for simple needle replacement
The removable discharge needle unit (including a set
of four needles) substantially simplifies maintenance.
To remove the unit, just slide it toward both ends as
indicated by the arrows.
-76 to +392 °F
is available.
Discharge needle after
Efficient charge
protected by air barrier
removal structure
(0.05 MPa) for one month
Discharge needle unit
Advertisement
