Table of Contents
Advertisement
124
Wi-Fi Settings
Do the various settings for Wi-Fi function.
Owner SSID/Guest SSID Common Settings
Set the items common to Owner SSID and Guest SSID.
Setting items are as follows:
・Wi-Fi Access Point Settings
Item
Wireless Function
SSID Display
Encryption Key Display
・Wi-Fi Frequency Band Settings
Item
Band Setting
IEEE 802.11ax Mode
・2.4GHz Settings
Item
Dual Channel Function
Channels
・5GHz Settings(Owner SSID only)
Item
Channels
・Connection Restrictions of Wi-Fi Terminals
Item
Maximum Number of Connections
・Advanced Settings
Item
Transmission Output
1 Auto channel select selects one channel, 1/6/11ch, to use for communications with Wi-Fi devices.
We recommend having one channel, 1/6/11ch, set as the channel for auto channel select, however, if you need to use a channel other than
the recommended channel, to avoid interference with systems other than Wi-Fi, change the channel manually.
2 Total number of units of Owner SSID and Guest SSID. The numbers of units cannot be set variously.
Set to ON to use Wi-Fi.
Initial setting: ON
Set to ON to show SSID on displayed menu of Wi-Fi router.
Initial setting: ON
Set to ON to show Encryption Key on displayed menu of Wi-Fi router.
Initial setting: ON
Select band to use with Wi-Fi router.
Initial setting: 2.4GHz
Set to ON to use IEEE 802.11ax Mode.
Initial setting: ON
Set to ON to use Dual Channel Function.
Initial setting: OFF
Select channel to use for Wi-Fi.
Initial setting: Auto Channel Select
Select channel to use for Wi-Fi.
Initial setting: Auto Channel Select (W56, Not including 144ch)
Set the maximum number of Wi-Fi devices that can be connected simultaneously.
Initial setting: 16
Select the transmission output for Wi-Fi. You can avoid signal interference with other networks
by suppressing transmission output.
Initial setting: 100%
Description
Description
Description
1
Description
Description
Description
2
Advertisement
Table of Contents
