Logging; Diagnostics; System Overview - Bosch AUTODOME 7100i User Manual

AUTODOME 7100i
Note: You can only delete certificates that you have added; you cannot delete the default
certificate.
4.8.4

Logging

Current log level
Select the level of event for which to display log entries or to log.
Number of displayed entries
Select the number of entries to display.
Enable software sealing
Select this check box to enable software protection that prevents users from adjusting camera
settings. This function also protects the camera from unauthorized access.
4.8.5

Diagnostics

Accesses the Self Test diagnostic, that displays status Passed or Failed on the most recent
event, not a counter.
Click the button Start self-test to initiate the diagnostic and display log events.
Logs
This section updates automatically with the history of the camera and maintains a log of all
events such as those listed below. Click the REFRESH button to reload log data.
–
–
–
–
–
–
4.8.6

System Overview

This window is for information only and cannot be modified. Keep this information at hand
when seeking technical support.
Select the text on this page with a mouse and copy it so that it can be pasted into an e-mail if
required.
Click Open source licenses to open a browser page with information on the open source
software in use.
Click Other open source licenses to open a browser page with general open source software
license information.
Bosch Security Systems B.V.
Low voltage - a drop in incoming power below the level where the camera becomes non-
functional
Highest temperature - the internal temperature exceeds specifications
Lowest temperature - the internal temperature exceeds minimum levels
Day/Night switch
Pan motor default
Total time on
User Manual
Configuration | en 61
2022-12 | V01 | DOC