Motorola MVME2400 Series Installation And User Manual page 5

A character precedes a data or address parameter to specify the numeric format, as follows
(if not specified, the format is hexadecimal):
An asterisk (*) following a signal name for signals that are level significant denotes that the
signal is true or valid when the signal is low.
An asterisk (*) following a signal name for signals that are edge significant denotes that the
actions initiated by that signal occur on high to low transition.
In this manual, assertion and negation are used to specify forcing a signal to a particular
state. In particular, assertion and assert refer to a signal that is active or true; negation and
negate indicate a signal that is inactive or false. These terms are used independently of the
voltage level (high or low) that they represent.
Data and address sizes are defined as follows:
Byte
Half word
Word
Double word
®
Motorola and the Motorola logo are registered trademarks of Motorola, Inc.
All other products mentioned in this document are trademarks or registered trademarks of
their respective holders.
This edition of the MVME2400-Series Installation and Use manual incorporates the
following changes:
Date
March 2000
Terminology
$ Specifies a hexadecimal character
0x Specifies a hexadecimal number
% Specifies a binary number
& Specifies a decimal number
8 bits, numbered 0 through 7, with bit 0 being the least significant.
16 bits, numbered 0 through 15, with bit 0 being the least significant.
32 bits, numbered 0 through 31, with bit 0 being the least significant.
64 bits, numbered 0 through 63, with bit 0 being the least significant.
Recent Updates
Addition of the 450 MHz product configurations and a general review
of the manual's accuracy and content.
Description of Change