Panasonic WUME-SF4D-2 Instruction Manual page 39

<Connection method>
Step 1 Insert the connector of the bottom cap cable (option) into the connector on the device.
When inserting the connector, fit the cable into the groove on the device.
Step 2 Tighten the two M2.6 screws. Tighten to a torque of 0.3N·m or less.
© Panasonic Industrial Devices SUNX Co., Ltd. 2016
Connector
Connector
Groove
M2.6 screw
(Included with bottom cap cable)
Bottom cap cable
(Option)
Cable
This device
Mounting
39