Using Intermediate Supporting Bracket Ms-Sfb-2 (Option) ·31 - Panasonic WUME-SF4D-2 Instruction Manual

Safety light curtain type 4

Table of Contents

2-4-1-2 Using Intermediate Supporting Bracket MS-SFB-2 (Option)

Step 1 Loosen the hexagon-socket head bolt [M4 (length 12mm), opposing faces 3mm] on the

intermediate supporting bracket.

Step 2 Fit the intermediate supporting bracket onto the side of the device, and fasten with the

hexagon-socket head bolt [M4 (length 12mm), opposing faces 3mm].

Tighten to a torque of 1.2N·m or less.

For the mounting position of the intermediate supporting bracket, refer to "6-3 Dimen-

sions".

Slide and remove the fixing fitting of the intermediate supporting bracket from the base

bracket. Change the direction of the fixing fitting, and engage the notches on the fixing

fitting with the rails on the base bracket.

Hex socket cap bolt

[M4 (length 12mm), opposing faces 3mm]

This device

Notch on fixing fitting

Mounting

Table of Contents

Troubleshooting

Sf4d series