Override Function; Protection Function; Cable Switching Function - Panasonic WUME-SF4D-2 Instruction Manual

3-11-8 Override Function

Item
Override valid time
When the muting disconnection detection function is valid, the override function is released
when a circuit break occurs.

3-11-9 Protection Function

Item

Protection function

3-11-10 Cable Switching Function

Item

Cable switching function

<Reference>
Some inputs and outputs such as the control outputs (OSSD 1 / 2) and power cabling cannot be
changed.
© Panasonic Industrial Devices SUNX Co., Ltd. 2016
Description
You can change the maximum
time that the override state can
be maintained.
Description
You can require that a pass-
word (4 alphanumeric digits)
be entered in order to change
device settings.
Description
You can select from placement
patterns with a determined input
signal and non-safety output
signal.
Settings / ranges
0 (invalid)
1 to 600 sec. (increments of 1 sec.)
Settings / ranges
Invalid (settings can be changed
without entering a password)
Valid (password required to
change settings)
Settings / ranges
This depends on the selected
cable.
For details, refer to the "SF4D-TM1
User's Manual".
Functions
Factory default
setting
60 sec.
Factory default
setting
Invalid
Factory default
setting
Invalid
125