Table Of Contents - Toro 08752 Operator's Manual

Introduction
Read this information carefully to learn how to operate
and maintain your product properly and to avoid
injury and product damage. You are responsible for
operating the product properly and safely.
Visit www.Toro.com for product safety and operation
training materials, accessory information, help finding
a dealer, or to register your product.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model
and serial numbers of your product ready.
identifies the location of the model and serial numbers
on the product. Write the numbers in the space
provided.
Important:
With your mobile device, you can
scan the QR code (if equipped) on the serial
number plate to access warranty, parts, and other
product information.
Model No.
Serial No.
This manual identifies potential hazards and has
safety messages identified by the safety-alert symbol
(Figure 2), which signals a hazard that may cause
© 2018-The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Figure 1
Figure 1
serious injury or death if you do not follow the
recommended precautions.
This manual uses 2 words to highlight information.
Important calls attention to special mechanical
information and Note emphasizes general information
worthy of special attention.
Contents
Safety ....................................................................... 3
Safety and Instructional Decals .......................... 3
Setup ........................................................................ 4
Installing the Spring Rake ................................... 5
Product Overview ..................................................... 8
Operation .................................................................. 8
Training Period ................................................... 8
Raking Tips......................................................... 8
Raking Pattern.................................................... 8
Entering and Leaving the Trap ............................ 9
Adjusting the Rake Angle.................................... 9
Setting the Transport Position........................... 10
g268421
Maintenance ............................................................11
Inspecting and Cleaning the Rake and
Traction Unit...................................................11
Greasing the Attachment Adapter......................11
g003441
2
Figure 2
Safety-alert symbol
Contact us at www.Toro.com.
Printed in the USA.
All Rights Reserved
g000502