Loading Trolley And Carrier Instructions: Unloading - Amsco Evolution HC-600 Operator's Manual

6.6 Loading Trolley
Instructions: Unloading
WARNING – BURN HAZARD:
!
• Sterilizer, shelves and loading
carrier will be hot after cycle is
run. Always wear protective
gloves and apron when
removing a processed load.
Protective gloves and apron
must be worn when reloading
sterilizer following the
previous operation.
• Steam may be released from
the chamber when door is
opened. Step back from the
sterilizer each time the door is
opened to minimize contact
with steam vapor.
WARNING – SLIPPING
!
HAZARD: To reduce slippery
floor conditions, keep floors
dry by immediately wiping up
any spilled liquids or
condensation in sterilizer
loading or unloading area.
Sterilizer Operation
and Carrier
1. Open chamber door.
2. Move loading trolley forward until it engages with dock.
3. Once loading trolley engages with dock, loading trolley latches
4. Push trolley fully into chamber
5. Turn handwheel clockwise until loading carrier is fully lifted from
6. Withdraw carrier and trolley from chamber.
7. Loading trolley disengages from dock when fully withdrawn from
8. Close chamber door.
9. Transfer load from sterilizer area.
to dock as it begins pushing into chamber.
supports in chamber.
chamber. Pull trolley away from sterilizer.
Operator Manual
6-7
P129390-106