Table of Contents
Advertisement
NIC2-2 · Installation and Set-up Manual
3.3 Bookinglist configuration
Here the configuration of the internal bookinglist is made. Choosing this selection will
present three new alternatives.
Bookinglist configuration
Settings
Define input field
Link field to patient window
If a booking- or RIS-system is to be used to download patient data to the booking list it is
only one thing to be set here. Under settings "kind of input" must be defined. All other set-
tings regarding the communication protocol and patient data settings are made under sec-
tion "Communication parameters", please refer to "3.4 Communication param" on page 12.
3.3.1
Settings
Settings
Kind of input
Default sortorder
Erase list at power interrupt
The cursor is located at "Kind of input" and can be moved between the different settings by
pressing up- and down-arrow keys. With the softkeys Previous and Next the values can be
selected by pressing the corresponding function keys F2 and F3.
The following settings can be performed:
Kind of input
Toggle between HOST/MANUAL. Determine whether the data is download-
ed from a host system or if it shall be manually inserted. Default setting is
HOST.
Default sortorder
Toggle between NAME/PID. Determine whether the booking list shall be sort-
ed by name or the personal identity number. Default setting is NAME.
Erase list at power interrupt
Toggle between Yes/No. If set to Yes the booking list will be erased every
time the Network ID Camera is powered down. If set to No the booking list
will remain unchanged after a power interrupt. Default setting is Yes.
Triacon AB Sweden
Previous
Next
Previous
Next
11
Publication no. 201101
Exit
HOST
NAME
YES
Save
October 2005
Advertisement
Table of Contents
